Loading...
Searching...
No Matches
RadioddityCodeplug::GeneralSettingsElement Class Reference
Implements the base class of general settings for all Radioddity codeplugs. More...
#include <radioddity_codeplug.hh>
Inheritance diagram for RadioddityCodeplug::GeneralSettingsElement:
Collaboration diagram for RadioddityCodeplug::GeneralSettingsElement:
Classes | |
| struct | Limit |
| Some limits for the settings. More... | |
Public Types | |
| typedef RadiodditySettingsExtension::MonitorType | MonitorType |
| Use monitor type from extension. | |
| typedef RadioddityToneSettingsExtension::ARTSTone | ARTSTone |
| Use ARTS tone mode from extension. | |
| typedef RadiodditySettingsExtension::ScanMode | ScanMode |
| Use scan mode from extension. | |
Public Member Functions | |
| GeneralSettingsElement (uint8_t *ptr) | |
| Constructor. | |
| virtual | ~GeneralSettingsElement () |
| Destructor. | |
| void | clear () |
| Resets the general settings. | |
| virtual QString | name () const |
| Returns the radio name. | |
| virtual void | setName (const QString &name) |
| Sets the radio name. | |
| virtual unsigned | radioID () const |
| Returns the DMR radio ID. | |
| virtual void | setRadioID (unsigned id) |
| Sets the DMR radio ID. | |
| virtual Interval | preambleDuration () const |
| Returns the preamble duration in ms. | |
| virtual void | setPreambleDuration (const Interval &dur) |
| Sets the preamble duration in ms. | |
| virtual MonitorType | monitorType () const |
| Returns the monitor type. | |
| virtual void | setMonitorType (MonitorType type) |
| Sets the monitor type. | |
| virtual Level | voxSensitivity () const |
| Returns the VOX sensitivity [1-10], 0=disabled. | |
| virtual void | setVOXSensitivity (Level value) |
| Sets the VOX sensitivity. | |
| virtual unsigned | lowBatteryWarnInterval () const |
| Returns the low-battery warn interval in seconds. | |
| virtual void | setLowBatteryWarnInterval (unsigned sec) |
| Sets the low-battery warn interval in seconds. | |
| virtual unsigned | callAlertDuration () const |
| Returns the call-alert duration in seconds. | |
| virtual void | setCallAlertDuration (unsigned sec) |
| Sets the call-allert duration in seconds. | |
| virtual unsigned | loneWorkerResponsePeriod () const |
| Returns the lone-worker response period in minutes. | |
| virtual void | setLoneWorkerResponsePeriod (unsigned min) |
| Sets the lone-worker response period in minutes. | |
| virtual unsigned | loneWorkerReminderPeriod () const |
| Returns the lone-worker reminder period in seconds. | |
| virtual void | setLoneWorkerReminderPeriod (unsigned sec) |
| Sets the lone-worker reminder period in seconds. | |
| virtual Interval | groupCallHangTime () const |
| Returns the group call hang time in ms. | |
| virtual void | setGroupCallHangTime (const Interval &dur) |
| Sets the group call hang time in ms. | |
| virtual Interval | privateCallHangTime () const |
| Returns the private call hang time in ms. | |
| virtual void | setPrivateCallHangTime (const Interval &dur) |
| Sets the private call hang time in ms. | |
| virtual bool | downChannelModeVFO () const |
Returns true if the down-channel mode is VFO. | |
| virtual void | enableDownChannelModeVFO (bool enable) |
| Enables/disables down-channel mode is VFO. | |
| virtual bool | upChannelModeVFO () const |
Returns true if the up-channel mode is VFO. | |
| virtual void | enableUpChannelModeVFO (bool enable) |
| Enables/disables up-channel mode is VFO. | |
| virtual bool | resetTone () const |
Returns true if the reset tone is enabled. | |
| virtual void | enableResetTone (bool enable) |
| Enables/disables reset tone. | |
| virtual bool | unknownNumberTone () const |
Returns true if the unknown number tone is enabled. | |
| virtual void | enableUnknownNumberTone (bool enable) |
| Enables/disables reset tone. | |
| virtual ARTSTone | artsToneMode () const |
| Returns the ARTS tone mode. | |
| virtual void | setARTSToneMode (ARTSTone mode) |
| Sets the ARTS tone mode. | |
| virtual bool | digitalTalkPermitTone () const |
Returns true if the digital channel talk permit tone is enabled. | |
| virtual void | enableDigitalTalkPermitTone (bool enable) |
| Enables/disables digital channel talk permit tone. | |
| virtual bool | analogTalkPermitTone () const |
Returns true if the analog channel talk permit tone is enabled. | |
| virtual void | enableAnalogTalkPermitTone (bool enable) |
| Enables/disables analog channel talk permit tone. | |
| virtual bool | selftestTone () const |
Returns true if the reset tone is enabled. | |
| virtual void | enableSelftestTone (bool enable) |
| Enables/disables reset tone. | |
| virtual bool | channelFreeIndicationTone () const |
Returns true if the channel free indication tone is enabled. | |
| virtual void | enableChannelFreeIndicationTone (bool enable) |
| Enables/disables channel free indication tone. | |
| virtual bool | allTonesDisabled () const |
Returns true if all tones are disabled. | |
| virtual void | disableAllTones (bool disable) |
| Disables/enables all tones. | |
| virtual bool | batsaveRX () const |
Returns true if reception is disabled for battery saving. | |
| virtual void | enableBatsaveRX (bool enable) |
| Enables/disables battery saving by disabling RX. | |
| virtual bool | batsavePreamble () const |
Returns true if preable is disabled for battery saving. | |
| virtual void | enableBatsavePreamble (bool enable) |
| Enables/disables battery saving by disabling preamble. | |
| virtual bool | allLEDsDisabled () const |
Returns true if all LEDs are disabled. | |
| virtual void | disableAllLEDs (bool disable) |
| Disables/enables all LEDs. | |
| virtual bool | quickKeyOverrideInhibited () const |
| Returns true if quick-key override is inhibited. | |
| virtual void | inhibitQuickKeyOverride (bool inhibit) |
| Inhibits quick-key override. | |
| virtual bool | txExitTone () const |
Returns true if the TX exit tone is enabled. | |
| virtual void | enableTXExitTone (bool enable) |
| Enables/disables TX exit tone. | |
| virtual bool | txOnActiveChannel () const |
Returns true if the radio transmits on the active channel on double monitor. | |
| virtual void | enableTXOnActiveChannel (bool enable) |
| Enables/disables transmission on active channel on double monitor. | |
| virtual bool | animation () const |
Returns true if animation is enabled. | |
| virtual void | enableAnimation (bool enable) |
| Enables/disables animation. | |
| virtual ScanMode | scanMode () const |
| Returns the scan mode. | |
| virtual void | setScanMode (ScanMode mode) |
| Sets the scan mode. | |
| virtual unsigned | repeaterEndDelay () const |
| Returns the repeater end delay in [0-10]. | |
| virtual void | setRepeaterEndDelay (unsigned delay) |
| Sets the repeater end delay in [0-10]. | |
| virtual unsigned | repeaterSTE () const |
| Returns the repeater STE in [0-10]. | |
| virtual void | setRepeaterSTE (unsigned ste) |
| Sets the repeater STE in [0-10]. | |
| virtual bool | hasProgPassword () const |
Returns true if a programming password is set. | |
| virtual QString | progPassword () const |
| Returns the programming password. | |
| virtual void | setProgPassword (const QString &pwd) |
| Sets the programming password. | |
| virtual void | clearProgPassword () |
| Resets the programming password. | |
| virtual bool | fromConfig (Context &ctx, const ErrorStack &err=ErrorStack()) |
| Encodes the general setting from the given config. | |
| virtual bool | updateConfig (Context &ctx, const ErrorStack &err=ErrorStack()) |
| Updates the given config from this settings. | |
| Public Member Functions inherited from Codeplug::Element | |
| Element (const Element &other) | |
| Copy constructor. | |
| virtual | ~Element () |
| Destructor. | |
| Element & | operator= (const Element &other) |
| Copy assignment. | |
| virtual bool | isValid () const |
Returns true if the pointer is not null. | |
| bool | fill (uint8_t value, unsigned offset=0, int size=-1) |
| Fills the memsets the entire element to the given value. | |
| bool | getBit (const Offset::Bit &offset) const |
| Reads a specific bit at the given byte-offset. | |
| bool | getBit (unsigned offset, unsigned bit) const |
| Reads a specific bit at the given byte-offset. | |
| void | setBit (const Offset::Bit &offset, bool value=true) |
| Sets a specific bit at the given byte-offset. | |
| void | setBit (unsigned offset, unsigned bit, bool value=true) |
| Sets a specific bit at the given byte-offset. | |
| void | clearBit (unsigned offset, unsigned bit) |
| Clears a specific bit at the given byte-offset. | |
| void | clearBit (const Offset::Bit &offset) |
| Clears a specific bit. | |
| uint8_t | getUInt2 (const Offset::Bit &offset) const |
| Reads a 2bit unsigned integer at the given bit-offset. | |
| uint8_t | getUInt2 (unsigned offset, unsigned bit) const |
| Reads a 2bit unsigned integer at the given byte- and bit-offset. | |
| void | setUInt2 (const Offset::Bit &offset, uint8_t value) |
| Stores a 2bit unsigned integer at the given bit-offset. | |
| void | setUInt2 (unsigned offset, unsigned bit, uint8_t value) |
| Stores a 2bit unsigned integer at the given byte- and bit-offset. | |
| uint8_t | getUInt3 (const Offset::Bit &offset) const |
| Reads a 3bit unsigned integer at the given bit-offset. | |
| uint8_t | getUInt3 (unsigned offset, unsigned bit) const |
| Reads a 3bit unsigned integer at the given byte- and bit-offset. | |
| void | setUInt3 (const Offset::Bit &offset, uint8_t value) |
| Stores a 3bit unsigned integer at the given bit-offset. | |
| void | setUInt3 (unsigned offset, unsigned bit, uint8_t value) |
| Stores a 3bit unsigned integer at the given byte- and bit-offset. | |
| uint8_t | getUInt4 (const Offset::Bit &offset) const |
| Reads a 4bit unsigned integer at the given bit-offset. | |
| uint8_t | getUInt4 (unsigned offset, unsigned bit) const |
| Reads a 4bit unsigned integer at the given byte- and bit-offset. | |
| void | setUInt4 (const Offset::Bit &offset, uint8_t value) |
| Stores a 4bit unsigned integer at the given bit-offset. | |
| void | setUInt4 (unsigned offset, unsigned bit, uint8_t value) |
| Stores a 4bit unsigned integer at the given byte- and bit-offset. | |
| uint8_t | getUInt5 (const Offset::Bit &offset) const |
| Reads a 5bit unsigned integer at the given byte- and bit-offset. | |
| uint8_t | getUInt5 (unsigned offset, unsigned bit) const |
| Reads a 5bit unsigned integer at the given byte- and bit-offset. | |
| void | setUInt5 (const Offset::Bit &offset, uint8_t value) |
| Stores a 5bit unsigned integer at the given byte- and bit-offset. | |
| void | setUInt5 (unsigned offset, unsigned bit, uint8_t value) |
| Stores a 5bit unsigned integer at the given byte- and bit-offset. | |
| uint8_t | getUInt6 (const Offset::Bit &offset) const |
| Reads a 6bit unsigned integer at the given byte- and bit-offset. | |
| uint8_t | getUInt6 (unsigned offset, unsigned bit) const |
| Reads a 6bit unsigned integer at the given byte- and bit-offset. | |
| void | setUInt6 (const Offset::Bit &offset, uint8_t value) |
| Stores a 6bit unsigned integer at the given byte- and bit-offset. | |
| void | setUInt6 (unsigned offset, unsigned bit, uint8_t value) |
| Stores a 6bit unsigned integer at the given byte- and bit-offset. | |
| uint8_t | getUInt8 (unsigned offset) const |
| Reads a 8bit unsigned integer at the given byte- and bit-offset. | |
| void | setUInt8 (unsigned offset, uint8_t value) |
| Reads a 8bit unsigned integer at the given byte- and bit-offset. | |
| int8_t | getInt8 (unsigned offset) const |
| Reads a 8bit signed integer at the given byte- and bit-offset. | |
| void | setInt8 (unsigned offset, int8_t value) |
| Reads a 8bit signed integer at the given byte- and bit-offset. | |
| uint16_t | getUInt16_be (unsigned offset) const |
| Reads a 16bit big-endian unsigned integer at the given byte-offset. | |
| uint16_t | getUInt16_le (unsigned offset) const |
| Reads a 16bit little-endian unsigned integer at the given byte-offset. | |
| void | setUInt16_be (unsigned offset, uint16_t value) |
| Stores a 16bit big-endian unsigned integer at the given byte-offset. | |
| void | setUInt16_le (unsigned offset, uint16_t value) |
| Stores a 16bit little-endian unsigned integer at the given byte-offset. | |
| uint32_t | getUInt24_be (unsigned offset) const |
| Reads a 24bit big-endian unsigned integer at the given byte-offset. | |
| uint32_t | getUInt24_le (unsigned offset) const |
| Reads a 24bit little-endian unsigned integer at the given byte-offset. | |
| void | setUInt24_be (unsigned offset, uint32_t value) |
| Stores a 24bit big-endian unsigned integer at the given byte-offset. | |
| void | setUInt24_le (unsigned offset, uint32_t value) |
| Stores a 24bit little-endian unsigned integer at the given byte-offset. | |
| uint32_t | getUInt32_be (unsigned offset) const |
| Reads a 32bit big-endian unsigned integer at the given byte-offset. | |
| uint32_t | getUInt32_le (unsigned offset) const |
| Reads a 32bit little-endian unsigned integer at the given byte-offset. | |
| void | setUInt32_be (unsigned offset, uint32_t value) |
| Stores a 32bit big-endian unsigned integer at the given byte-offset. | |
| void | setUInt32_le (unsigned offset, uint32_t value) |
| Stores a 32bit little-endian unsigned integer at the given byte-offset. | |
| uint64_t | getUInt64_be (unsigned offset) const |
| Reads a 64bit big-endian unsigned integer at the given byte-offset. | |
| uint64_t | getUInt64_le (unsigned offset) const |
| Reads a 64bit little-endian unsigned integer at the given byte-offset. | |
| void | setUInt64_be (unsigned offset, uint64_t value) |
| Stores a 64bit big-endian unsigned integer at the given byte-offset. | |
| void | setUInt64_le (unsigned offset, uint64_t value) |
| Stores a 64bit little-endian unsigned integer at the given byte-offset. | |
| uint8_t | getBCD2 (unsigned offset) const |
| Reads a 2-digit (1-byte/8bit) BDC value in big-endian at the given byte-offset. | |
| void | setBCD2 (unsigned offset, uint8_t value) |
| Stores a 2-digit (1-byte/8bit) BDC value in big-endian at the given byte-offset. | |
| uint16_t | getBCD4_be (unsigned offset) const |
| Reads a 4-digit (2-byte/16bit) BDC value in big-endian at the given byte-offset. | |
| void | setBCD4_be (unsigned offset, uint16_t value) |
| Stores a 4-digit (2-byte/16bit) BDC value in big-endian at the given byte-offset. | |
| uint16_t | getBCD4_le (unsigned offset) const |
| Reads a 4-digit (2-byte/16bit) BDC value in little-endian at the given byte-offset. | |
| void | setBCD4_le (unsigned offset, uint16_t value) |
| Stores a 4-digit (1-byte/16bit) BDC value in little-endian at the given byte-offset. | |
| uint32_t | getBCD8_be (unsigned offset) const |
| Reads a 8-digit (4-byte/32bit) BDC value in big-endian at the given byte-offset. | |
| void | setBCD8_be (unsigned offset, uint32_t value) |
| Stores a 8-digit (4-byte/32bit) BDC value in big-endian at the given byte-offset. | |
| uint32_t | getBCD8_le (unsigned offset) const |
| Reads a 8-digit (4-byte/32bit) BDC value in little-endian at the given byte-offset. | |
| void | setBCD8_le (unsigned offset, uint32_t value) |
| Stores a 8-digit (4-byte/32bit) BDC value in little-endian at the given byte-offset. | |
| QString | readASCII (unsigned offset, unsigned maxlen, uint8_t eos=0x00) const |
Reads up to maxlen ASCII chars at the given byte-offset using eos as the string termination char. | |
| void | writeASCII (unsigned offset, const QString &txt, unsigned maxlen, uint8_t eos=0x00) |
Stores up to maxlen ASCII chars at the given byte-offset using eos as the string termination char. | |
| QString | readUnicode (unsigned offset, unsigned maxlen, uint16_t eos=0x0000) const |
Reads up to maxlen unicode chars at the given byte-offset using eos as the string termination char. | |
| void | writeUnicode (unsigned offset, const QString &txt, unsigned maxlen, uint16_t eos=0x0000) |
Stores up to maxlen unicode chars at the given byte-offset using eos as the string termination char. | |
Static Public Member Functions | |
| static constexpr unsigned int | size () |
| The size of the element. | |
Protected Member Functions | |
| GeneralSettingsElement (uint8_t *ptr, unsigned size) | |
| Hidden constructor. | |
| Protected Member Functions inherited from Codeplug::Element | |
| Element (uint8_t *ptr, size_t size) | |
| Hidden constructor. | |
Additional Inherited Members | |
| Protected Attributes inherited from Codeplug::Element | |
| uint8_t * | _data |
| Holds the pointer to the element. | |
| size_t | _size |
| Holds the size of the element. | |
Detailed Description
Implements the base class of general settings for all Radioddity codeplugs.
Memory layout of the general settings
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
0000 | Radio name, 8 x 1byte ASCII encoded, 0xff terminated text ...
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
0004 ... |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
0008 | 8-digit BCD DMR ID, big-endian. |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
000c | Unused set to 0x00000000 |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
0010 | Unused set to 0x00 | Tx preamble N x 60ms | Monitor type 0=open, 1=silent | VOX sensitivity [1..10] |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
0014 | Low battery interval N x 5s | Call alert dur N x 5s | Lone worker response in min | Lone worker reminder in sec |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
0018 | Groupcall hang-time N x 500ms | Priv.call hang-time N x 500ms | ARTS tone |UNT|RST|UMV|DMV|SBP|SBR|DAT| 0 |FIT|STT|PAT|PDT|
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
001c | 1 |IQO|DAL| 0 0 0 0 0 | ScanM |ANI|DBW|TXT| 0 0 0 | Rep. STE | Rep. delay | Unused set to 0x00 |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
0020 | Prog. passwd 8 x ASCII, 0xff terminated ...
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
0024 ... |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
where
UNT = Unknown number tone
RST = Reset tone
UMV = Up-channel mode VFO
DMV = Down-channel mode VFO
SBP = Send wakeup preamble.
SBR = Enable sleep mode during RX.
DAT = Disables all tones;
FIT = Channel free indication tone
STT = Self-test pass tone
PAT = Talk permit tone analog
PDT = Talk permit tone digital
IQO = Inhibit quick-key override
DAL = Disables all LEDs
ScanM = Scan mode
ANI = Enable animation
DBW = Always TX on active channel on double-wait
TXT = TX exit tone
Member Function Documentation
◆ clear()
|
virtual |
Resets the general settings.
Reimplemented from Codeplug::Element.
The documentation for this class was generated from the following files:
- /builddir/build/BUILD/qdmr-0.14.1-build/qdmr-0.14.1/lib/radioddity_codeplug.hh
- /builddir/build/BUILD/qdmr-0.14.1-build/qdmr-0.14.1/lib/radioddity_codeplug.cc
